Electrician & Air Conditioning Services in Stanton Ca
Do you need electrical, air conditioning and water heater services? Electrician Services Corp stays true to our dedication in delivering top-notch results with Flat-Rate Pricing. Commercial and after business hour service calls are $159, we offer a $39 residential service call special. A licensed and insured service company based in Orange County California that specializes in everything electrical, from lighting, to electrical panel upgrades, water heaters and air conditioning. Our team is composed of certified technicians.
Electrical Repair In Stanton Ca
A customer in Stanton Ca called in about a problem with some switches they tried to install. These switches were three-way and four-way switches. Needless to say when we showed up the wiring was a mess. we started to diagnose the wiring and found the proper feeds, travelers, and switch legs and once this was figured out we installed the switches and the lights turned on and off properly. If you have a similar issue or maybe want something installed, we offer a wide variety of electrical services. Check through our website to see what we offer. We also offer 24/7 service. Electrician Services is local, family owned and operated. All our expert electricians are trained, licensed and background checked. Safety is our primary concern and customer service is our top priority. We are the Electrician Stanton Ca and provide electrical service you can trust.
✓ UP FRONT PRICING
✓ NO OVERTIME CHARGES
✓ FAST AND RELIABLE
✓ REPAIRS AND UPGRADES
✓ FREE ESTIMATES
✓ SAME DAY SERVICE
✓ 24 HOUR SERVICE
More On Different Types Of Light Switches
There is different types of switches within lighting circuits and each type has a different function. The first type is a single pole switch. This switch is in direct line to a light fixture and allows electricity to flow through a single switch leg turn the light or lights on and off. The second type of switch is a double pole switch. This switch is also in direct line to a light fixture or fixtures and allows electricity to flow through one or two switch legs to turn the lights on or off. The third type of switch is called a 3 way switch. In order to have 3 way switches operating properly there needs to be at least to of these switches. This is where the person that does not have a lot of experience ends up confused and gives up. The basic rule of thumb to operate 3 way switching is to find out your power coming in from the source. once you figure that out then all you need to do is make sure to put the hot wire on the common screw on the switch. Then connect the traveler wires on the traveler screws and repeat the same pattern on the second 3 way switch, when the travelers are connected correctly the last wire to connect would be the switch leg that connects to your lights. The fourth type of switch would be a 4 way switch. These types of switches are installed between 3 way switches so that you have the ability to turn your lights on and off with multiple switches in different areas through out your home or business. Do not attempt to install any type of electrical device yourself and make sure not to hire someone that is not qualified. Contact a licensed professional to valuate your needs for your home and business.
CALL NOW 714-987-2368